Louis Metals is a reliable supplier of Stainless Steel 410 Bars and Rods in Houston, USA. For its hardness, strength, and resistance to corrosion, SS 410 is a versatile martensitic stainless steel with moderate corrosion– and oxidation-resistant applications. Louis Metals provides precision-cut and heat-treated varieties to satisfy project-specific requirements in oil & gas, mechanical, and fabrication industries.
Stainless Steel 410 contains 11.5–13.5% Chromium and 0.15% Carbon. It provides tensile strength of 450–700 MPa, yield strength of approximately 275 MPa, and hardness up to 40 HRC. It is magnetic and can be hardened by heat treatment. SS 410 balances strength and corrosion resistance at a relatively low price, making it suitable for structural and mechanical purposes.
| Specification | ASTM A479/ SA479 ASTM A276/ ASME SA276 |
|---|---|
| Grade | Stainless Steel 410 (UNS S41000) |
| Hex Bar size | 18 to 57mm (11/16″ – 2-3/4″) |
| Round bar size | OD 4mm to 500mm |
| Square bar size | 18mm to 47mm (11/16″- 1-3/4″) |
| Billet Size | 1/2″- 495mm Dia. |
| Rectangles Size | 33 x 30mm – 295 x 1066mm |
| Bright Bar | OD 4mm to 100mm |
| Tolerance | K12 H12, K10, H9, H11, H8, H13K9, H10, K11, or as per need |
| Flat bar size | 1/2” to 10” in thickness of 2 to 150mm |
| Angle bar size | 3*20*20~12*100*100 |
| Finish | centreless ground, Cold (bright) drawn, hot rolled, peeled, smooth turned, hot rolled annealed, slit rolled edge, Bright, Rough Turned, Grinding, Polish & Black |
| Form | Flat Bar, Hollow, Round, Square, Triangle, Rectangle, Half Round Bar, Rod, T-Bar, Precision Ground Bar, Hex (A/F), Blocks, Channel Bar, Threaded, Round Rod, Billet, Profiles, I/H Bar, Ingot, Rings, Forging etc. |
| Technique | 440C Stainless Steel Hot Rolled, Cold Drawn, Rod, Forged Round Bar, Cold Rolled |
| Condition | annealed, Hardened & tempered |
| Section | 3.0 -12.0 mm thickness, 80 x 40 to 150 x 75mm section |
| Channel Bar | 5.0 – 6.0mm thickness |
| Surface | Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Polished, Hairline |
| Hollow Bar | 32mm OD x 16mm ID – 250mm OD x 200mm ID |
| Element | S | Cr | Si | C | P | Mn | Ni |
| SS 410 | 0.030 | 11.5-13.5 | 1.00 | 0.15 | 0.040 | 1.00 | 0.75 |
| Elongation | Melting Point | Yield Strength (0.2%Offset) | Density | Tensile Strength |
| – | – | MPa – 275 | – | MPa – 480 |
| STANDARD | UNS | BS | EN | JIS | WERKSTOFF NR. | GOST | AFNOR |
| SS 410 | S41000 | 410S21 | 56A | SUS 410 | 1.4006 | – | – |
Stainless Steel 410 Bars and Rods offer excellent wear resistance, good corrosion resistance, and high strength. These properties make them suitable for applications that require strength and durability, such as in the aerospace, automotive, and food processing industries.
These bars and rods are widely used in industries such as petrochemical, chemical processing, power generation, and marine applications. They are also suitable for heat exchangers, boiler parts, furnace components, and high-temperature exhaust systems.
SS 410 Bars and Rods are employed in cutlery, valve parts, turbine blades, kitchenware, and pumps. They exhibit excellent performance in mildly corrosive atmospheres and provide resistance against mechanical stress. Power generation, construction, petrochemical, and food processing industries widely employ SS 410 due to its strength, resistance to wear, and cost-effectiveness.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Louis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 Louis Metals. All rights reserved
