Carbon Steel EN-1A Bars

Louis Metals manufactures Carbon Steel EN–1A bars in Houston, providing a low-carbon alloy specific to machining and forming operations. It is furnished in soft-annealed condition according to ASTM B446 and is suitable for components requiring good dimensional stability, surface quality, and weldability.

Carbon Steel EN-1A Rods Dealer in Los Angeles, Carbon Steel 230M07 Bars Manufacturer in Los Angeles, Carbon Steel EN-1A Square Bars Supplier in Texas, Carbon Steel EN-1A Flat Bars Price List in Houston, Carbon Steel EN-1A Rectangular Bars Supplier in California, DIN 1.0715 Carbon Steel EN-1A Bars Price List in Texas, Carbon Steel EN-1A Round Bars Weight Calculator Exporter Stockist in Houston.

Carbon Steel EN-1A Round Bars

Carbon Steel EN-1A Hex Bars

Carbon Steel EN-1A Series Rods

What is Carbon Steel EN-1A Series Bars ?

EN‑1A normally has 0.007–0.15% carbon with minor alloying elements
. Annealed tensile strength is approximately 350–500 MPa with excellent ductility. It is readily machinable, formable, and weldable but not suited to high-strength applications.

Carbon Steel EN-1A Rods Exporter in USA, Carbon Steel EN-1A Round Bars Stockist in Houston, Carbon Steel EN-1A Hex Bars Supplier in USA, Carbon Steel 230M07 Cold Drawn Round Bars Distributor in Texas, Carbon Steel EN-1A Rods Stockist California Carbon Steel EN-1A Rods Price in California, Carbon Steel EN-1A Round Bars Price List, Carbon Steel EN-1A Rectangular Bars Supplier in Texas, Carbon Steel EN-1A Bars DimEN-8sions in USA.

Carbon Steel EN-1A Bars Specifications

Grade	EN1A Round Bar
EN1A Square bar size	4 to 100mm
Carbon Steel EN-1A Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
CS EN-1A Hex Bar size	2-100mm A/F
EN1A Angle bar size	3mm20mm20mm~12mm100mm100mm
Carbon Steel EN-1A Rectangles Size	33 x 30mm to 295 x 1066mm
CS EN-1A Flat bar size	Thickness: 2 -100mm
CS EN-1A Flat bar size	Width: 10 to 500mm
EN1A Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Carbon Steel EN-1A Section	3.0 to 12.0mm thickness
CS EN-1A Round bar size	Diameter: 3-~800mm
EN1A Billet Size	1/2″ to 495mm Diameter
Carbon Steel EN-1A Round Bar Standard Dimensions	Diameter / Height:
EN1A Surface	Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Carbon Steel EN-1A Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
CS EN-1A Technique	EN1A Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
EN1A Condition	Hardened & tempered, annealed
Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Form	EN1A Round, Rod, T-Bar, Nickel Alloy Channel Bar, Precision Ground Bar, Nickel Alloy Flat Bar, Nickel Alloy Square Bar, Nickel Alloy Blocks, Nickel Alloy Round Rod, Nickel Alloy Rings, Nickel Alloy Hollow, Nickel Alloy Triangle, Rectangle, Hex (A/F), Nickel Alloy Threaded, Half Round Bar, Profiles, Nickel Alloy Billet, Nickel Alloy Ingot, I/H Bar, Forging etc.
Processing	Bar cutting to 650mm
Our EN1A Round bar conforms to NACE MR0175/ISO 15156

Chemical Compositions of Carbon Steel EN-1A Bars

230M07 (EN1A) Specification Chemical composition
Carbon	0.15% max
Manganese	0.90-1.30%
Silicon	0.40% max
Sulphur	0.25-0.35%
Phosphorus	0.070 Max
Chromium	–
Molybdenum	–
Nickel	–
Lead	0.15-0.35% (Where specified)

Mechanical Properties of Carbon Steel EN-1A Bars

Max Stress	370-480 n/mm2 Min	dependent on ruling section
Yield Stress	240-400 n/mm2 Min	dependent on ruling section
0.2% Proof Stress	225-360 n/mm2 Min	dependent on ruling section
Elongation	6-10% Min	dependent on ruling section

You Need Our Support, to Have Any Projects?

Test Certificate

Why Louis Metals?

Packaging

Modern Equipments

Expert Engineers

Well Maintained

Efficient Factories

Carbon Steel EN-1A Bars Types

Stockist of Carbon Steel EN-1A Round Bars in Houston, Carbon Steel EN-1A Bars Supplier in USA, Carbon Steel EN-1A Rods Price List in Houston, Carbon Steel EN-1A Rectangular Bars Supplier in Houston, Carbon Steel EN-1A Hexagonal Bars Exporter in Los Angeles, Carbon Steel EN-1A T-Bars Exporter in USA, Carbon Steel EN-1A Cold Rolled Rods Exporter in Texas, Carbon Steel EN-1A Round Bar Manufacturer in California, Carbon Steel EN-1A Round Bars Distributor in USA, DIN 1.0715 Carbon Steel EN-1A Polished Rods Dealer in Los Angeles

Equivalent Grades Carbon Steel EN-1A Bars

STANDARD	UNS	DIN
EN1A Round Bar	–	–

Frequently Asked Questions (FAQ)

What are the available thicknesses for Carbon Steel EN-1A Bars?

Carbon Steel EN-1A Bars are typically available in thicknesses ranging from 6 mm to 300 mm or more, depending on the manufacturer and specific requirements of the application.

What are the mechanical properties of Carbon Steel EN-1A Bar?

Carbon Steel EN-1A bar has high machinability, tensile strength of 400-550 MPa, yield strength of 280 MPa, hardness of 130-180 HB, and excellent ductility for general engineering applications.

What is Carbon Steel EN-1A Bar used for?

Carbon Steel EN-1A Bars are used for manufacturing precision components like gears, shafts, spindles, and fasteners due to their excellent machinability, surface finish, and suitability for high-speed machining applications.

Carbon Steel EN-1A Bars Uses

EN‑1A bars find general usage in machining blanking, forming, and welding, and are ideal for brackets, enclosures, frames, and structures where there is no need for high strength. They are employed for prototype components, general sheet metal products, and structural supports in light-duty service.

Our Products

Other Products

Other Material

If You Are Looking To Buy High Quality

We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.