Louis Metals is a leading producer and seller of Stainless Steel 416 Rectangular Bars in Houston, USA, providing high-quality stainless steel products that are specifically designed for precision engineering and industrial uses. Relying on good machinability and precise dimensions, Louis Metals’ SS 416 rectangular bars are made by the latest production methods and rigorous quality checks. These bars offer a balance of strength, corrosion resistance, and a high surface finish, and they are suitable for parts involving high machining. Louis Metals guarantees prompt delivery and uniform quality, catering to industries like automotive, aerospace, and general engineering with consistent stainless steel offerings.
Stainless Steel 416 Rectangular Bars are martensitic stainless steels that contain mainly Chromium (12–14%), Sulfur (up to 0.15% for better machinability), Carbon (≤ 0.15%), and traces of Manganese, Silicon, Phosphorus, and Sulfur. The most machinable stainless steel, SS 416 contains tensile strength of 550–760 MPa, yield strength approximately 275 MPa, and medium hardness up to 35 HRC in hardened condition. It maintains magnetic properties and provides moderate corrosion resistance, especially in dry or mildly corrosive conditions, and is best used for high-speed machining and turning.
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 416 | 0.15 max | 1.25 max | 1.0 max | 0.06 max | 0.15 min | 14.00 – 12.00 | 0.6 | – | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN | BS |
| SS 416 | 1.4005 | S41600 | SUS 416 | X12CrS13 | 416S21 |
Stainless Steel 416 Rectangular Bars find extensive use where there is a requirement for high machinability, good strength, and moderate corrosion resistance. Typical applications include production of valve parts, gears, fasteners, shafts, studs, pump components, and motor parts. In the automotive and aeronautical fields, SS 416 is preferred for making accurate components that demand close tolerances and fine finishes. It is also utilized in making mechanical tools, bushings, and fittings. Owing to its brilliant performance under machining, SS 416 rectangular bars are well suited for high-volume manufacturing where tool wear is low and efficiency is high.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Louis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 Louis Metals. All rights reserved
