Louis Metals supplies Aluminium 1070 Rods and Bars from Houston, USA, that provide high-purity aluminum items for electrical and chemical industries. Alloy 1070 is renowned for good conductivity, corrosion resistance, and formability. We supply custom-cut sizes and finishes according to ASTM B211 standards, serving power transmission, refrigeration, and food processing industries with pure aluminum materials.
Aluminium 1070 has 99.7% aluminum and trace amounts of Iron and Silicon. It has tensile strength of 80–130 MPa and yield strength of approximately 35–85 MPa. It is non-heat-treatable alloy with fine conductivity, corrosion resistance, and workability. It is best suited for chemical and electrical uses where there is less need for alloying.
| Bar Wire Standard | ASTM B221, B211, B565, B316, AMS 4121 2014 |
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Rolled Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | Fe | Si | Mg | Mn | Cu | Zn | Ti | Al |
| Aluminium 1070 | 0.25 | 0.2 | 0.03 | 0.03 | 0.03 | 0.07 | 0.03 | 99.70 |
| Grade | Density (×1000 kg/m3) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Reduction in Area (%) |
| Aluminium 1070 | 7.7-8.03 | 640 | 495 | 10 | 45 |
| STANDARD | WERKSTOFF NR. | UNS |
| Aluminium 1070 | 3.0275 | A91070 |
Yes, Aluminum 1070 bars are corrosion-resistant due to their high purity, offering good resistance to atmospheric and chemical corrosion. However, they may be less resistant than alloyed aluminum grades.
Aluminum 1070 rods are typically sized by diameter, ranging from small diameters like 6mm to larger sizes of up to 150mm or more, with lengths commonly ranging from 1 to 6 meters.
To maintain Stainless Aluminium 1070 Bar, clean it regularly with mild detergent and water, avoid harsh chemicals, inspect for corrosion or scratches, and ensure proper storage to prevent physical damage.
Aluminium 1070 Bars and Rods serve applications in electrical conductors, heat sinks, transformer windings, chemical containers, and cookware. It‘s the go-to for where thermal or electrical conductivity is required. Its superior corrosion resistance and cold-working capability qualify it for refrigeration components, pipelines, and solar reflectors. Energy, chemical, and home appliance manufacturing industries use 1070 for pure, stable performance.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Louis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 Louis Metals. All rights reserved
