Louis Metals provides Aluminium 1050 Bars and Rods in Houston, USA, providing this high-purity aluminum alloy for industrial use, electrical applications, and decorative purposes. With a minimum aluminum content of 99.5%, 1050 is renowned for having excellent corrosion resistance, high reflectivity, and good workability, and is ideal for a broad variety of non-load-bearing applications.
Aluminium 1050 exhibits ductility and conductivity of good quality but comparatively low strength with tensile strength of about 85–100 MPa. It is a heat-treatable alloy that, through cold working, can be strengthened slightly with enhanced mechanical properties. The alloy is well suited for applications involving bending, forming, or surface treatment with improved corrosion resistance in chemical and atmospheric exposure.
| Bar Wire Standard | ASTM B221, B211, B565, B316, AMS 4121 2014 |
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Rolled Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | C | Mn | Si | Cu | Fe | Zn |
| 1050 | 0.05 max | 0.1 max | 0.30 max | 0-0.05 | 0-0.4 | 0-0.07 |
| UTS (Mpa) | Yield Strength (Mpa) | Elongation |
| 95 | 20 Min | 23 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS |
| EN AW-1050 A | 3.0255 | A91050 | S1B |
Yes, Aluminium 1050 bars are corrosion-resistant due to their high aluminum content (99.5%). They offer excellent resistance to corrosion in atmospheric conditions and chemical environments, making them suitable for various applications.
Yes, Aluminium 1050 rods can be customized in size and length based on specific requirements. Manufacturers often offer tailored dimensions to meet diverse industrial and commercial needs.
To maintain a Stainless Aluminum 1050 bar, clean it regularly with a soft cloth and mild detergent, avoid abrasive cleaners, store in a dry environment, and inspect for corrosion or damage.
Aluminium 1050 Bars and Rods find application in electrical conductors, chemical tanks, food processing machinery, signage, lamp reflectors, and architectural features. Due to high polishability and formability, it finds application in decorative as well as consumer-oriented products. It is also applied in HVAC systems and industrial parts where conductivity as well as corrosion resistance is of greater importance compared to strength.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Louis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 Louis Metals. All rights reserved
