Luois Metals stands out as a leading manufacturer and supplier of M2 Steel Bars and Rods right in Houston, USA. They specialize in delivering top-notch high-speed steel products that are perfect for tough industrial applications. M2 steel, known for its tungsten-molybdenum composition, is prized for its remarkable wear resistance, impressive toughness, and high red hardness. At Luois Metals, every M2 steel bar and rod is crafted with precision, meeting global quality standards. These products find their way into various industries, including automotive, aerospace, tooling, and engineering, where strength, reliability, and long-lasting performance are absolutely essential.
When it comes to composition, M2 Steel Bars and Rods are made up of carbon, tungsten, molybdenum, vanadium, and chromium, striking a perfect balance between hardness and toughness. They boast high tensile strength, exceptional wear resistance, and great resistance to deformation even at high temperatures. With a hardness level reaching up to 65 HRC after heat treatment, M2 steel keeps its cutting efficiency and dimensional stability, even in the most demanding conditions. These mechanical properties make M2 steel bars and rods a trustworthy choice for applications that demand precision, durability, and a long tool life.
| Specification | Details |
|---|---|
| Standard | ASTM A600, ASME SA600 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Form | Round |
| Diameter | 2mm to 100mm (depending on grades) |
| Length | 100 mm to 10,000 mm |
| Surface Condition | Black, Grinded, Turned Bright, Machined Proof |
| Maximum | Typical | ||||||
|---|---|---|---|---|---|---|---|
| Carbon | Chromium | Tungsten | Molybdenum | Vanadium | Cobalt | Annealed | Tempered |
| C | Cr | W | Mo | V | Co | Hb | HrC |
| 0.85 | 4.15 | 6.15 | 5.1 | 1.95 | – | 255 | 64 |
| Tensile strength | 1000-1400 MPa |
|---|---|
| Yield Strength | 3250 MPa |
| Abrasion (loss as-hardened; ASTM G65) | 25.8 mm3 |
| Impact Toughness | 67 J/cm2 |
| Hardness | 262 HRC |
| Modulus of elasticity | 207 GPa |
| Country | USA | German | Japan |
|---|---|---|---|
| Standard | ASTM A600 | DIN EN ISO 4957 | JIS G4403 |
| Grades | M2 | 1.3343 | SKH51 |
Yes, M2 steel can be welded, but it requires preheating and post-weld heat treatment to prevent cracking and ensure good weld strength due to its high hardness and wear resistance.
M2 steel rods are available in various sizes, typically ranging from 1/16" to 3" in diameter. Common finishes include bright, polished, and cold-drawn for enhanced surface quality and performance.
M2 steel bars are typically sized by diameter and length, with standard diameters ranging from 6 mm to 100 mm. Lengths usually vary from 3 meters to 6 meters.
Across various industries, M2 Steel Bars and Rods are widely used for crafting precision tools and components. In the tooling sector, you’ll find them in drill bits, milling cutters, taps, reamers, and saw blades, thanks to their high wear resistance and edge retention. The automotive and aerospace sectors rely on them for high-strength machine parts and cutting tools that can handle elevated temperatures. They’re also utilized in engineering for industrial knives, punches, and dies. M2 steel’s outstanding performance guarantees reliability in applications that require durability and consistent output.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Louis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 Louis Metals. All rights reserved
