Louis Metals provides Nimonic 75 bars and rods—a ground-breaking nickel-chromium alloy applied to early jet engine technologies. It resists creep at high temperatures and is the standard grade by which material performance is tested in engine testing.
Nimonic 75 has about 70% nickel and 20% chromium along with small amounts of aluminum and titanium. It resists creep up to ~815 °C and was used previously in jet engine turbine components .
Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade : Nimonic 75 (UNS No. N06075) Round Bars
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Our Nimonic Alloy 75 Round Bars conforms to NACE MR0175/ISO 15156
| Grade | C | Ni | Cu | Cr | Ti | Fe | Mn |
|---|---|---|---|---|---|---|---|
| Nimonic Alloy 75 | 0.08 / 0.15 | Bal | 0.5 max | 18.9 – 21.0 | 0.2 / 0.6 | 5.0 max | 1.0 max |
| Density | Modulus of Elasticity | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.37 g/cm3 | GPa – 206 | MPa – 750 | MPa – 275 | 42 % |
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Nimonic Alloy 75 | – | N06075 |
Yes, Nimonic 75 bars can be recycled after use. They are composed of valuable nickel-chromium alloys, making them suitable for recycling to recover and reuse their high-performance material properties.
Yes, Nimonic 75 Bar can be welded using TIG or MIG welding methods. Proper preheating, post-weld heat treatment, and the use of matching filler materials are essential for success.
Nimonic 75 rods are available in various sizes, typically ranging from 0.125" to 6" in diameter. Common finishes include cold drawn, hot rolled, and polished, depending on application needs.
Nimonic 75 bars are utilized in historic aero engines, heritage turbine components, and cryogenic plant in situations where performance data exists for historical reasons .
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Louis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Houston, USA
Copyright 2024 Louis Metals. All rights reserved
